EASE has been directed by its Board of Directors to take actions to wind down the sales of its diagnostic and emissions equipment by September 30, 2018.

On October 1, 2018, EASE will be merging with DENSO Products & Services Americas, Inc.

As a result of this, effective immediately;

EASE/DENSO will continue to provide for the fulfillment of ongoing warranty obligations.


Complete J2534 pass thru solution, includes J2534 programmer and J2534 reprogramming assistant to guide you. Optional OBD2 Scanner and off-board.

J2534 Programming with J2534 interface on All J2534 compliant ECUs

Increase the number of vehicles you service and expand your shops diagnostic capabilities with J2534 Reprogramming

J2534 device

The EASE J2534 Programming System II provides J2534 reprogramming for all J2534 compliant vehicles - virtually all 1996 and newer Domestic, Asian and European vehicles.  EASE J2534 Packages include our exclusive J2534 Reprogramming Assistant Software that guides you through the J2534 pass thru reprogramming process ensuring a successful J2534 programming event. Flash reprogramming is an important part of repairs on most 1996+ vehicles. There are now over 100 Million reprogrammable controllers on the road today.  You need a tool that can service them.   Don’t miss out on this profitable, and quickly growing market!  

Choose your J2534 Reflash Package

j2534 package

EASE J2534 Reflash Packages can be ordered with or without the EASE Scan Tool Software.  J2534 Reflash Packages include an EASE Universal Reprogrammer II+ Interface (UR2-J2534) and the cables you need to connect to the vehicle and PC.  They also include our exclusive Reprogrammer Assistant Software.

If you already have an EASE Universal Reprogrammer II+ Interface OR if you have a Drew Tech CarDAQ, Snap-on Pass thru Pro II or  other J2534 Compliant Device, you can order EASE Add-Ons for J2534 Devices.

 The EASE Reprogrammer Assistant Software and PC Scan Tool software is easy to install and use on your Windows desktop, laptop or tablet PC.  (Be sure to read EASE's and the vehicle manufacturer(s)' Reprogramming PC requirements before ordering).

Please Read:  Manufacturer reprogramming data subscription(s) are REQUIRED and are NOT included with EASE J2534 Reflash packages. These subscriptions can only be purchased from the OEM's website.  Short term subscriptions are available.   More OEM specific reprogramming information is available at nastf.org.


J2534 Reflash Package with

  • Reflash any J2534 Compliant Vehicle.  Includes our exclusive Reprogrammer Assistant that guides you step by step.

EASE Universal Reprogrammer II+ Interface, OBD II Cable, USB cable, Reprogrammer Assistant Software and one year of support.


J2534 Reflash Package

USB PC Connection

Price: $1,645.00

Add to Cart

PC Requirements


J2534 Reflash Package with
EASE Scan Tool

  • Reflash any J2534 Compliant Vehicle and Perform Generic and OEM Diagnostics with this EASE Combination Package

EASE Universal Reprogrammer II+ Interface, OBD II Cable, USB cable, Reprogrammer Assistant Software AND EASE X3 Pro Scan Tool Suite Software (EASE-X3) and one year of support on both.


J2534 Reflash Package
+ EASE-X3 Software Combo

USB PC Connection

Buy Individually for: $3440.00

Combo: $2,895.00

Add to Cart

PC Requirements - J2534 Package
PC Requirements - Scan Tool Software

J2534 Reflash + Domestic Scan Tool
Domestic X2 Pro Scan Tool Software & Universal Reprogrammer II+ Combination Packages are also available.


Add-Ons for J2534 Devices

  • Expand the capabilities of your EASE or
    ANY J2534 Device with these Add-ons

EASE PC Scan Tool Add-on
Use your J2534 Reprogrammer as a scan tool. Diagnose and reflash with same interface.


Off Board Reprogramming Add-on
Reprogram GM, Ford & Chrysler vehicle controllers on your bench top with this add-on.


EASE Reprogrammer Assistant Add-on
Perform faster and easier reflashes. Guides you step-by-step thru the reprogramming process. 


Do you know that many times reprogramming is the only way to repair a vehicle?

car repair

A vehicle controller reprogrammer / programmer is becoming an essential auto diagnostic tool in automotive repair shops today.   Many Technical Service Bulletins (TSBs) require reprogramming to the latest OEM calibration files to repair vehicle problems such as shifting, hesitation, rough idle, emissions quality, performance and more.   This makes the need for FLASH REPROGRAMMING to diagnose and repair automobiles more critical every day.   

    GM TSB Example with Reprogramming as Required Repair
  • Models:
    Certain 2007-2008 Chevrolet and GMC Trucks
  • Condition:
    Some customers may comment about a harsh 1-2 shift at light throttle.
  • Correction:
    Reprogram the transmission control module (TCM) with updated calibration files
    Ford TSB Example with Reprogramming as Required Repair
  • Models:
    Certain 2004 Ford Trucks
  • Condition:
    Low RPM, Miss after deceleration with cruise control engaged
  • Action:
    To service, reprogram the powertrain control module (PCM), fuel injection control module (FICM), and transmission control module (TCM) to latest calibration

The EASE J2534 Programming System II Is A Complete J2534 Pass Thru Solution

J2534 device

The EASE Universal Reprogrammer II+ can flash virtually every J2534 compliant Domestic, Asian and European vehicle on the road today .  You can use the EASE Universal Reprogrammer II+  to easily pass thru the latest calibration files from an OEM's website to the on-board vehicle controller.  Don’t miss out on this profitable, and quickly growing market!


Are You Ready To Start Reprogramming With Confidence? Our Reprogramming Assistant Makes Reflashing Easier

Do you feel overwhelmed when it comes to reprogramming a vehicle controller?  Are you unsure of what the proper reprogramming procedure is?   Don’t worry, you’re not alone.

ease assistant

Reprogramming a vehicle controller seems like an intimidating task but it’s easier than you’d think if you have an assistant to guide you.  Our exclusive Reprogramming Assistant software guides you step-by-step thru the reprogramming process.   It also includes the scan tool functions you need for reprogramming such as reading the VIN, DTCs, I/M status, MIL status and calibration. Our Assistant helps to eliminate the guesswork and costly mistakes, ensuring a successful J2534 programming event.

J2534 assistant

Great News!  We include our
Reprogramming Assistant Software for FREE
with our J2534 Reflash Package

J2534 device

Already have a J2534 Reprogrammer? 
Our Reprogramming Assistant Software can be used as an add-on for most J2534 compliant reprogrammers.


Never Miss A Great Offer

Sign up for our Email Newsletter
to learn about our latest products and sales events.

It's easy to subscribe – just enter your name and email address below.

Your Name:

E-mail address:

We respect your email privacy.

Quick Links To Other
EASE Products 

EASE Diagnostics

Click on one of our automotive diagnostic tools below for more information.

You are here:  J2534 Reprogramming

Contact Us

Contact EASE Diagnostics

EASE Diagnostics
187 Commerce Dr,
Scott Township, PA 18447 USA

Toll Free:  1-888-366-EASE (3273) 
Telephone: 570-587-7080
Fax:  570-587-7081
Tech Support:
  570-587-7082 >>

Send Us An On-line Message >>